SYSTEM TOOL / COMPATIBILITY

H-Beam Type Compatibility Checker

Confirm whether your H-beam geometry — symmetrical, asymmetrical, eccentric, or variable cross-section — is in the AUB-HB envelope before you scope an RFQ.

1. Select your H-beam type:

Symmetrical H-Beam

Equal flanges top and bottom, standard structural section.

Asymmetrical H-Beam

Unequal flanges (different width or thickness), used in moment-load bridges.

Eccentric H-Beam

Web offset from flange centerline, used in custom heavy machinery frames.

Variable Cross-Section

Tapered web height along length, used in tapered PEB columns and rafters.

2. Process requirements:

Spot weld output ready for downstream gantry SAW Need ±0.3 mm laser-vision positioning accuracy Need German Rexroth hydraulic clamping (±0.1 MPa) Must comply with AWS D1.1 Structural Welding Code Must carry CE Marking for EU import Need non-standard voltage (220V / 60Hz NA or 415V / 50Hz SEA)

[ SYSTEM IDLE ]

Awaiting profile selection and parameter input…

Confirm geometry envelope & request a configured RFQ

TECHNICAL TOOL AUB-HB Capacity Sizer FINANCIAL TOOL AUB-HB TCO / ROI Estimator ACTIVE MODULE H-Beam Type Compatibility Checker