{"id":3967,"date":"2026-06-17T09:08:06","date_gmt":"2026-06-17T09:08:06","guid":{"rendered":"https:\/\/aubrikmc.com\/?p=3967"},"modified":"2026-06-17T09:23:52","modified_gmt":"2026-06-17T09:23:52","slug":"welding-turntable","status":"publish","type":"post","link":"https:\/\/aubrikmc.com\/pt\/blog\/welding-turntable\/","title":{"rendered":"Guia de sele\u00e7\u00e3o de mesa girat\u00f3ria de soldagem: carga, velocidade e ajuste"},"content":{"rendered":"<div class=\"seo-blog-content\" style=\"padding: 0px 0; color: #2d2d2d;\">\n<p style=\"margin: 0 0 16px;\">Choosing the right welding turntable starts with matching rotation to the actual workpiece. One common pitfall is specifying the wrong rotation method for the job. While one small bench turntable might efficiently spin a round TIG flange 24\/7, that same table design can be the wrong piece of equipment for a part that is long, heavy, off-centered on the rotation axis, or pulled away from the fixture&#8217;s axis. Use this process to select the proper welding turntable, right welding positioner, pipe rotator or larger positioning system prior to requesting a quote.<\/p>\n<blockquote style=\"margin: 24px 0; padding: 18px 20px; border-left: 4px solid #6b7280; background: #f5f5f5;\">\n<p style=\"margin: 0 0 10px;\"><strong>Quick Specs: Welding Turntable Selection<\/strong><\/p>\n<ul style=\"margin: 0; padding-left: 22px;\">\n<li>Use a turntable for any part that can be clamped to the table, chuck or control itself.<\/li>\n<li>Check gross load, fixture weight, Center of Gravity (CG) and eccentricity prior to ordering your size unit.<\/li>\n<li>While maximum rpm may be stated, TIG needs a much slower, steadier rotation.<\/li>\n<li>Any pipe or stainless workpiece will require a hole in the end for purge gases.<\/li>\n<li>Heavy cylindrical shells usually need to sit on top of the rolls, rather than inside a flat turntable.<\/li>\n<\/ul>\n<\/blockquote>\n<h2>What a Welding Turntable Does in a Welding Positioning Setup<\/h2>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-3969\" src=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/1-29.png\" alt=\"What a Welding Turntable Does in a Welding Positioning Setup\" width=\"512\" height=\"512\" srcset=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/1-29.png 512w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/1-29-300x300.png 300w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/1-29-150x150.png 150w\" sizes=\"auto, (max-width: 512px) 100vw, 512px\" \/><\/p>\n<p>In a welding positioning cell setup, the turntable keeps the workpiece mounted on a table, faceplate or chuck and the welder on the work surface, reducing torch travel inside a defined working zone for a better welding process. In short, turntables move the part, instead of expecting the welder to walk around it or climb over it for more effective welding production.<\/p>\n<p>This is not merely a comfort issue. <a style=\"color: #2d2d2d; text-decoration: underline;\" href=\"https:\/\/www.osha.gov\/etools\/electrical-contractors\/prefabrication\/welding\" rel=\"nofollow noopener\" target=\"_blank\">OSHA welding ergonomics guidance<\/a> addresses excessive or static postures, awkward welding movements, bending over a workpiece, and prolonged reaching by the welder, all of which can add stress and fatigue in the back and shoulder areas.<\/p>\n<p><!-- [USER-DATA] --><\/p>\n<p>For over 20 years, <a style=\"color: #2d2d2d; text-decoration: underline;\" href=\"https:\/\/aubrikmc.com\/\">Aubrik<\/a> (formerly Wuxi ABK Machinery, founded in 1999) has focused on industrial and commercial rather than hobby applications, producing a full line of welding equipment from simple turntables and pipe welding machines to complex CNC cutting cells, wind tower fabrication lines, H-beam processing lines and other automated welding systems. When considering a welding turntable, remember that a new purchase often also includes welding accessories such as chucks, positioning faceplates, fixture size control, workpiece size checks and production cell interfaces.<\/p>\n<h3>What is a welding turntable?<\/h3>\n<p>This particular <a style=\"color: #2d2d2d; text-decoration: underline;\" href=\"https:\/\/aubrikmc.com\/welding-positioners\/\">rotary welding positioner<\/a> has been built with a single, horizontal welding axis. A round table, 3-jaw chuck or custom-engineered fixture holds the workpiece. During welding or inspection, the table rotates the workpiece at a pre-selected speed while the welder and any robot remain on the flat working platform, so that the torch, gun or scanner stays within its optimum operating zone and avoids over-reaching.<\/p>\n<p>Most units feature fixed horizontal tables, with many larger options adding tilting capability through angle control to weld the workpiece more safely at the desired welding angle.<\/p>\n<h2>Welding Turntable vs Weld Positioner vs Pipe Rotator<\/h2>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-3970\" src=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/2-12.png\" alt=\"Welding Turntable vs Weld Positioner vs Pipe Rotator\" width=\"512\" height=\"512\" srcset=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/2-12.png 512w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/2-12-300x300.png 300w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/2-12-150x150.png 150w\" sizes=\"auto, (max-width: 512px) 100vw, 512px\" \/><\/p>\n<p>Naming can mislead buyers.<\/p>\n<p>Catalog descriptions of equipment can get confusing because vendors use overlapping wording. A better differentiator is how the workpiece itself is held and manipulated for positioning. UK Health and Safety Executive guidance describes turntables and related devices as equipment for orienting a workpiece or multiple fixture sizes and supporting them for welding at a set angle. Rotators, by definition, employ one or more driven, supported and idler rollers against a cylindrical workpiece to achieve rotation.<\/p>\n<div style=\"overflow-x: auto; margin: 18px 0;\">\n<table style=\"width: 100%; border-collapse: collapse;\">\n<thead>\n<tr>\n<th style=\"border: 1px solid #e0e0e0; padding: 10px; text-align: left;\">Equipment class<\/th>\n<th style=\"border: 1px solid #e0e0e0; padding: 10px; text-align: left;\">How it holds the part<\/th>\n<th style=\"border: 1px solid #e0e0e0; padding: 10px; text-align: left;\">Best fit<\/th>\n<th style=\"border: 1px solid #e0e0e0; padding: 10px; text-align: left;\">Buyer warning<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Welding turntable<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Table, faceplate, chuck, or fixture<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Flanges, rings, small pipe spools, circular seams<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Poor fit for long shells that need roller support<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Tilt-rotate weld positioner<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Faceplate plus tilt axis<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Assemblies needing angle change during setup<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Tilt capacity can be lower than flat table capacity<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Pipe rotator or turning rolls<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Driven and idler rollers under the shell<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Long pipes, tanks, vessels, cylindrical shells<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Watch axial drift and roller contact stability<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Column and boom manipulator<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Moves the weld head, not only the workpiece<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Large vessels, long welds, automated stations<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Needs more floor space and guarding review<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>Rule of thumb for when a turntable might work: if you can chuck a workpiece to a table and safely spin it around the table joints, a turntable may be the best fit. But if a part is a long, thin cylinder requiring stability throughout its length, turning rolls should be considered. If a weld head needs to travel far across a long part, you may want to consider a manipulator or robotic cell setup instead.<\/p>\n<h2>Load, Diameter, and Center-of-Gravity Checks Before You Ask for a Quote<\/h2>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-3971\" src=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/3-12.png\" alt=\"Load, Diameter, and Center-of-Gravity Checks Before You Ask for a Quote\" width=\"512\" height=\"512\" srcset=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/3-12.png 512w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/3-12-300x300.png 300w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/3-12-150x150.png 150w\" sizes=\"auto, (max-width: 512px) 100vw, 512px\" \/><\/p>\n<p>Load rating is just about the first thing any buyer asks about, but it is not the last metric you need to consider before buying to ensure safety. In &#8220;A Primer on Equipment and Procedure for the Handling of Round-Work Pieces&#8221; in The 2026 AWS Welding Digest, the authors point out that off-axis loads can cause sudden movement, clamping and anchoring affect stability, and changes in orientation impact balance. HSE guidance also identifies center of gravity height and lateral eccentricity as critical considerations for positioner stability.<\/p>\n<blockquote style=\"margin: 20px 0; padding: 16px 18px; border-left: 4px solid #6b7280; background: #f5f5f5;\">\n<p style=\"margin: 0;\">Engineering Note: Inquire for estimates about a workpiece weight, fixture weight, chuck weight, maximum round-work diameter, distance from the table face plate to the work center of gravity, and the probable welding angle. Placing 300 kg parts in the center will create a different load situation than hanging 300 kg pieces 200mm off the center axis.<\/p>\n<\/blockquote>\n<p>Bancroft&#8217;s &#8220;Bench positioner User Manual&#8221; provided a great case-in-point in its TT-100 unit. The specification called for a 200-lb. horizontal load and a 100-lb. vertical load, in addition to table diameter, tilt angle, center of gravity, and eccentricity limitations. The specified loads were particular to that model, but the lesson learned here is that horizontal load and vertical load must be read together with horizontal eccentricity and center of gravity.<\/p>\n<h2>Rotation Speed, Torque, and Control for TIG or Continuous Seams<\/h2>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-3972\" src=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/4-8.png\" alt=\"Rotation Speed, Torque, and Control for TIG or Continuous Seams\" width=\"512\" height=\"512\" srcset=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/4-8.png 512w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/4-8-300x300.png 300w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/4-8-150x150.png 150w\" sizes=\"auto, (max-width: 512px) 100vw, 512px\" \/><\/p>\n<p>Rotation speed should align with the welding operation, the thickness and size of your welding material, the part diameter, and the travel speed. HSE guidelines point out that the operator determines how rotation speed is set based upon the welding technique being applied, and indicates 50 mm\/min to 1500 mm\/min as being typical of the peripheral speed range. You won\u2019t have to use a 1500-mm.\/min. surface speed across every round-work piece, however; the effective rpm will change based upon your part\u2019s diameter and welding procedure.<\/p>\n<h3>How does a welding positioner work?<\/h3>\n<p>Following securing the part, motor engagement spins the table, with the speed and rotation direction monitored and altered using a dial, controller, pedal, PLC signal or robotics interface. Steady speed enables consistent travel rate and arc length by your welder. Where TIG welding is concerned, the slow speeds are often more significant than top-speed capabilities. Discussions on field use show that many TIG operators require a slow rotation for smooth control with an ability to keep the travel in the center of the welding area to make access for the center hole purge easy.<\/p>\n<p>Because of that requirement, &#8220;1-15 rpm&#8221; is not sufficient. You should ask how well the table smooths out at the speeds your welding operation will most often use, whether there is a foot pedal, whether rotation remains steady under fixture weight, and whether there is a remotely positioned on\/off switch. Slow rpm welding instability &#8211; bouncing, jolting or over-running &#8211; will readily appear in the finished bead.<\/p>\n<h2>Chuck, Faceplate, and Fixture Setup<\/h2>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-3974\" src=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/5-7.png\" alt=\"Chuck, Faceplate, and Fixture Setup\" width=\"512\" height=\"512\" srcset=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/5-7.png 512w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/5-7-300x300.png 300w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/5-7-150x150.png 150w\" sizes=\"auto, (max-width: 512px) 100vw, 512px\" \/><\/p>\n<p>Chucks are more than an embellishment-they are part and parcel of a system that ensures a shop quickly centers the round stock, grips flanges securely, channels purge gas effectively, and reiterates set-up parameters without redundant reassembly for each round-work piece. Many turn table use a three-jaw chuck; a slotted faceplate increases your ability to set custom clamps and to accommodate irregular assemblies.<\/p>\n<p><!-- [WEBSEARCH: https:\/\/aubrikmc.com\/welding-positioners\/welding-turntable\/] --><\/p>\n<p>Aubrik&#8217;s BY-series page includes 3-jaw chuck options from 160 mm up to 630 mm and center-hole bore options from 20 mm up to 80 mm. That information is critical for pipe, stainless, and TIG work, because a gas purge route, cable path, and clamping envelope will determine whether the turntable is a real fit.<\/p>\n<ul style=\"margin: 16px 0; padding-left: 22px;\">\n<li>Early checks should cover speed control, faceplate diameter, and purge access for small TIG parts.<\/li>\n<li>Flanges require coordinated reviews of chuck size, jaw travel, table diameter, and bolt pattern.<\/li>\n<li>Mixed fabrication applications warrant photos of the fixture or its drawing before order release.<\/li>\n<li>Robotic welding systems require details on inputs, outputs, emergency stop circuitry, and control interface notes.<\/li>\n<\/ul>\n<h2>Manual, Motorized, and Semi-Automated Welding Turntables<\/h2>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-3976\" src=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/6-6.png\" alt=\"Manual, Motorized, and Semi-Automated Welding Turntables\" width=\"512\" height=\"512\" srcset=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/6-6.png 512w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/6-6-300x300.png 300w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/6-6-150x150.png 150w\" sizes=\"auto, (max-width: 512px) 100vw, 512px\" \/><\/p>\n<p>Manual welding positioners are still applicable for repair benches, training, and low-volume applications, and are a reasonable solution where the operator needs only sporadic rotation. Motorized turntables are applicable to repeated parts, circular seams, and applications where the stable bead relies on consistent motion. Semi-automated equipment provides additional support through foot control, remote on\/off switching, PLC handshakes, or integrated robotic cells. Customers who move one unit from bay to bay can also inquire about a dedicated cart for their control box, foot pedal and cabling.<\/p>\n<div style=\"overflow-x: auto; margin: 18px 0;\">\n<table style=\"width: 100%; border-collapse: collapse;\">\n<thead>\n<tr>\n<th style=\"border: 1px solid #e0e0e0; padding: 10px; text-align: left;\">Control type<\/th>\n<th style=\"border: 1px solid #e0e0e0; padding: 10px; text-align: left;\">Use it when<\/th>\n<th style=\"border: 1px solid #e0e0e0; padding: 10px; text-align: left;\">Check before buying<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Manual<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Occasional rotation or fixture-only work<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Brake, lock, table balance, hand clearance<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Motorized<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Repeat circular welds and steady rotation<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Low-speed stability, torque, duty cycle<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Semi-automated<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Torch stand, foot switch, or fixed sequence work<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Start\/stop behavior, signal wiring, emergency stop<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Robot-ready<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Auxiliary axis or cell-loaded parts<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Fieldbus, I\/O map, guarding, cell acceptance test<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<h2>Supplier and Accessory Checklist for Industrial Welding Equipment<\/h2>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-3977\" src=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/7-4.png\" alt=\"Supplier and Accessory Checklist for Industrial Welding Equipment\" width=\"512\" height=\"512\" srcset=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/7-4.png 512w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/7-4-300x300.png 300w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/7-4-150x150.png 150w\" sizes=\"auto, (max-width: 512px) 100vw, 512px\" \/><\/p>\n<p>Compare prices only after equipment scope is clearly defined. Prepare a concise request for quotations (RFQ) to suppliers prior to initiating comparative purchasing that details your part drawing, the gross load, your approach to the fixture, the expected table diameter, the applicable process type, the electrical service available, your preferred method of control, your specific chuck requirement, and any desired certificates or certifications.<\/p>\n<p><!-- [USER-DATA] --><\/p>\n<p>This application needs specific assistance from supplier design, not simply an entry in a price listing. Aubrik has noted ISO9001 certification and CE mark approval, provides one-year free warranty coverage, supports <a style=\"color: #2d2d2d; text-decoration: underline;\" href=\"https:\/\/aubrikmc.com\/services\/\">customized OEM development<\/a>, and reports annual production capacity of one thousand units of welding equipment and two hundred units of cutting tools. Treat <a style=\"color: #2d2d2d; text-decoration: underline;\" href=\"https:\/\/www.iso.org\/standard\/62085.html\" rel=\"nofollow noopener\" target=\"_blank\">ISO 9001:2015<\/a> as quality-management evidence, not a substitute for weld procedure qualification; if the customer job calls for AWS D1.1, ASME Section IX, OSHA site rules, or another project code, include that requirement in the RFQ. Potential purchasers comparing models of welding positioner should rely on this information when pre-qualifying potential suppliers and then verify the manufacturer-specified product catalog for the chosen item.<\/p>\n<div style=\"overflow-x: auto; margin: 18px 0;\">\n<table style=\"width: 100%; border-collapse: collapse;\">\n<thead>\n<tr>\n<th style=\"border: 1px solid #e0e0e0; padding: 10px; text-align: left;\">RFQ field<\/th>\n<th style=\"border: 1px solid #e0e0e0; padding: 10px; text-align: left;\">Why it matters<\/th>\n<th style=\"border: 1px solid #e0e0e0; padding: 10px; text-align: left;\">What to send<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Gross load<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Includes part, chuck, fixture, and clamps<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Maximum kg plus fixture estimate<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Center of gravity<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Controls tipping and eccentric load risk<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Sketch with distance from table face<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Rotation speed<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Sets bead rhythm and torch timing<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Required rpm or travel speed range<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Workholding<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Defines chuck, faceplate, and purge path<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Part OD\/ID, jaw needs, bore needs<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Controls<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Separates bench use from cell integration<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Foot switch, PLC, robot brand, voltage<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>Comparisons of models should assess these inputs against industrial welding turntable models. Treating any rotary table generically will oversimplify its intended application.<\/p>\n<h2>Aubrik BY-Series Spec Context for Welding Turntable Buyers<\/h2>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-3978\" src=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/8-3.png\" alt=\"Aubrik BY-Series Spec Context for Welding Turntable Buyers\" width=\"512\" height=\"512\" srcset=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/8-3.png 512w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/8-3-300x300.png 300w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/8-3-150x150.png 150w\" sizes=\"auto, (max-width: 512px) 100vw, 512px\" \/><\/p>\n<p><!-- [WEBSEARCH: https:\/\/aubrikmc.com\/welding-positioners\/welding-turntable\/] --><\/p>\n<p>Aubrik&#8217;s BY-series page provides details about six standard <a style=\"color: #2d2d2d; text-decoration: underline;\" href=\"https:\/\/aubrikmc.com\/welding-positioners\/welding-turntable\/\">industrial welding turntable models<\/a>, from 50 kg through 2000 kg. Use the information below only as context for initial selection; you still need the workpiece drawing, the total fixture mass and the total center of gravity before completing a final design. Table capacity, diameter and rotation speed are listed here as examples of how those three specs relate together.<\/p>\n<div style=\"overflow-x: auto; margin: 18px 0;\">\n<table style=\"width: 100%; border-collapse: collapse;\">\n<thead>\n<tr>\n<th style=\"border: 1px solid #e0e0e0; padding: 10px; text-align: left;\">Model<\/th>\n<th style=\"border: 1px solid #e0e0e0; padding: 10px; text-align: left;\">Load capacity<\/th>\n<th style=\"border: 1px solid #e0e0e0; padding: 10px; text-align: left;\">Table diameter<\/th>\n<th style=\"border: 1px solid #e0e0e0; padding: 10px; text-align: left;\">Rotation speed<\/th>\n<th style=\"border: 1px solid #e0e0e0; padding: 10px; text-align: left;\">Typical buyer check<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">BY-50<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">50 kg<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">200 mm<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">0.5-5 rpm<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Small TIG parts and bench fixtures<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">BY-100<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">100 kg<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">250 mm<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">0.3-4 rpm<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Light fabrication and brackets<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">BY-300<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">300 kg<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">320 mm<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">0.2-3 rpm<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Pipe spools and flanges<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">BY-500<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">500 kg<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">400 mm<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">0.15-2 rpm<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Pressure vessel sub-assemblies<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">BY-1000<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">1000 kg<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">500 mm<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">0.1-2 rpm<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Industrial tanks and tilted access<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">BY-2000<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">2000 kg<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">600 mm<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">0.08-1.5 rpm<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Heavy fabrication and robot cells<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>Consistent performance can be achieved, but the rule is not simply &#8220;larger is always safer.&#8221; As capacity increases, table diameter and motor size are not the only components to address: fixture design and speed control need review too. That is the rationale behind matching a model to the application rather than selecting by brand alone.<\/p>\n<h2>Rotary Welding Positioner Power, Chuck and Accessory Checks<\/h2>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-3979\" src=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/9-2.png\" alt=\"Rotary Welding Positioner Power, Chuck and Accessory Checks\" width=\"512\" height=\"512\" srcset=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/9-2.png 512w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/9-2-300x300.png 300w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/9-2-150x150.png 150w\" sizes=\"auto, (max-width: 512px) 100vw, 512px\" \/><\/p>\n<p>Confirm that all welding accessories around the welding positioner are coordinated with the equipment purchased, whether the setup is manual, semi-automatic or automated, before treating any &#8220;welding positioner for sale&#8221; listing as a production-ready component. Everything from the chuck and faceplate to the foot switch, ground path, power supply, cabling and accessories should work together without requiring shop modifications later.<\/p>\n<p>Variable speed control can be the first consideration for customers who wish to improve weld quality and increase efficiency on circular seams. A smooth low-speed setting gives the welder better speed consistency for the puddle, torch angle and filler, while inconsistent low-speed control may make even a good fixture unusable.<\/p>\n<p>Catalog specs can hide important differences. High-quality welds may be specified for a 50kg small bench unit and a 500kg industrial table, but the mechanical design, load rating, precise accuracy needs and duty environment are completely different. American and EU catalogs often list in lbs, while some Asian catalogs list in kg.<\/p>\n<p>After correcting for the difference in measurement and subtracting any fixture weight, you can assess productivity, labor savings potential, automation fit and whether the equipment has enough efficiency to be put back into future work.<\/p>\n<h2>The Turntable Fit Matrix<\/h2>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-3980\" src=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/10-1.png\" alt=\"The Turntable Fit Matrix\" width=\"512\" height=\"512\" srcset=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/10-1.png 512w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/10-1-300x300.png 300w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/10-1-150x150.png 150w\" sizes=\"auto, (max-width: 512px) 100vw, 512px\" \/><\/p>\n<p>Use the matrix below as your quick reference. This matrix is not a substitute for a quote from our engineers and it is not designed to make every single job work, but it can weed out common mismatches: ordering a turntable when the work really needs a roller table, or ordering a manual table for a repeated motorized rotation job.<\/p>\n<div style=\"overflow-x: auto; margin: 18px 0;\">\n<table style=\"width: 100%; border-collapse: collapse;\">\n<thead>\n<tr>\n<th style=\"border: 1px solid #e0e0e0; padding: 10px; text-align: left;\">Workpiece shape<\/th>\n<th style=\"border: 1px solid #e0e0e0; padding: 10px; text-align: left;\">Rotation need<\/th>\n<th style=\"border: 1px solid #e0e0e0; padding: 10px; text-align: left;\">Workholding method<\/th>\n<th style=\"border: 1px solid #e0e0e0; padding: 10px; text-align: left;\">Positioner class<\/th>\n<th style=\"border: 1px solid #e0e0e0; padding: 10px; text-align: left;\">Best next action<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Small TIG round parts<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Slow, steady rotation<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Small chuck or faceplate<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Bench welding turntable<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Ask for low-rpm smoothness and purge access<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Flanges and rings<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Continuous circular weld<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">3-jaw chuck or bolt fixture<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Motorized rotary welding positioner<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Send OD, ID, weight, and fixture sketch<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Short pipe sections<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Round weld with purge route<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Chuck with center bore<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Turntable or pipe positioner<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Confirm center hole and jaw travel<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Long pipe or tank shell<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Supported rotation along length<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Driven and idler rollers<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Pipe rotator \/ turning rolls<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Do not start with a flat turntable<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Pressure vessel components<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Controlled angle and rotation<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Fixture plus tilt support<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Tilt-rotate weld positioner<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Check vertical load and CG envelope<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Repetitive fixture weldments<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Repeatable position and cycle rhythm<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Dedicated fixture<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Motorized table with foot control<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Ask for duty cycle and spare parts list<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Heavy fabrication assemblies<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Stable indexed rotation<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Custom fixture and large faceplate<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Industrial positioner<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Request rating chart and FAT plan<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Robot-loaded indexing cells<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Signal-driven motion<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Fixture plus robot handshake<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Robot-ready turntable<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Ask for I\/O map and fieldbus support<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Repair-shop mixed jobs<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Occasional part movement<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Mixed clamps<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Manual or light motorized table<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Avoid paying for controls you will not wire<\/td>\n<\/tr>\n<tr>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Custom OEM production cells<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Part-specific motion path<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Engineered fixture and control package<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Custom positioner system<\/td>\n<td style=\"border: 1px solid #e0e0e0; padding: 10px;\">Send drawings, robot brand, and cycle target<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>Use the fit matrix before the model grid. If the equipment class is clear, you can use the Aubrik welding turntable page to compare the BY series load classes, jib range, tilting, and individual customization.<\/p>\n<h2>What Is Changing in Welding Turntables and Positioners<\/h2>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-full wp-image-3981\" src=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/11.png\" alt=\"What Is Changing in Welding Turntables and Positioners\" width=\"512\" height=\"512\" srcset=\"https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/11.png 512w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/11-300x300.png 300w, https:\/\/aubrikmc.com\/wp-content\/uploads\/2026\/06\/11-150x150.png 150w\" sizes=\"auto, (max-width: 512px) 100vw, 512px\" \/><\/p>\n<p>Current buying behavior is not about a new label. It is a move away from one-task bench fixtures and toward catalog equipment ready for cell application. In short, customers want less downtime, better fixture documentation, center-hole clearance for purge lines, and robotic interface capability information up front when they are on the phone.<\/p>\n<p>Search information further indicates a heightened awareness of welding positioners, rotary welding positioners and pipe welding positioners, signifying buyers are shopping between equipment types before placing phone calls.<\/p>\n<p>Procurement gets easier when the turntable request is tied to part geometry. For a circular part that is small and easy to clamp, request a welding turntable model. For a long cylindrical part, request rotators. For work requiring multi-axis access, request a weld positioner or cell review. This brief check avoids another quote cycle and reduces efficiency risk on the project.<\/p>\n<h2>FAQ<\/h2>\n<h3>What is a welding turntable?<\/h3>\n<p>A faceplate, chuck or fixture holds the workpiece while the table rotary action spins it during welding. This setup is used for round seams, flanges, rings, pipes or smaller parts where constant rotation helps the welder maintain an even position.<\/p>\n<h3>How does a welding positioner work?<\/h3>\n<p>A weld positioner rotates, tilts or aligns the workpiece so the welder or torch can operate from a more stable position. Straightforward welding turntables function primarily as single-axis rotators. Tilt-rotate positioners provide that additional axis of motion so the joint can approach a flatter or more level weld position.<\/p>\n<h3>Can a welding turntable be used for both TIG and MIG welding?<\/h3>\n<p>Yes &#8211; if the speed range and workholding suit the process. TIG work may require a slow, steady rhythm, and center purge could also be a requirement. MIG or MAG work may tolerate a faster rhythm, but it still requires the right load, fixture and grounding.<\/p>\n<h3>What is the difference between a welding turntable and a pipe rotator?<\/h3>\n<p>Turntables support the part from a rotating table or chuck. Pipe rotators support cylindrical workpieces on rollers along their length. Short pipe sections and flanges may fit a turntable. Long tanks, pipes, and vessel shells usually belong on turning rolls.<\/p>\n<h3>What chuck size do I need for a welding turntable?<\/h3>\n<p>Start with the outside diameter of the part, ID, contact area and whether a purge hose or cable needs to pass through the center. Next, check whether the chuck has enough gripping range, bore size and fixture allowance for the gross workpiece weight.<\/p>\n<h3>Is a manual welding positioner enough for production work?<\/h3>\n<p>It may suffice if the application consists of occasional setup work, repairs or small volumes. Normal production in the form of a repeated circular seam almost always requires motorized rotation, because speed control, repeatability and hands-free start\/stop all contribute to weld quality.<\/p>\n<h3>What should I send before asking for a welding turntable quote?<\/h3>\n<p>Send us the drawing of your workpiece, the approximate part weight, your estimate for chuck or fixture weight, part diameter, center of gravity if available, welding process, voltage, desired speed range, preferred table size and whether the unit should interface with a robot or PLC.<\/p>\n<h2>Next Step for Aubrik Buyers<\/h2>\n<p>When your part fits the turntable category, compare BY-series options on the Aubrik welding turntable page. If the part needs a wider positioning system, review Aubrik welding positioners, check available services, or send the drawing through the Aubrik contact page.<\/p>\n<h2>Related Aubrik Resources<\/h2>\n<ul style=\"margin: 16px 0; padding-left: 22px;\">\n<li><a style=\"color: #2d2d2d; text-decoration: underline;\" href=\"https:\/\/aubrikmc.com\/welding-positioners\/welding-turntable\/\">Welding Turntable BY-series<\/a><\/li>\n<li><a style=\"color: #2d2d2d; text-decoration: underline;\" href=\"https:\/\/aubrikmc.com\/welding-positioners\/\">Welding Positioners<\/a><\/li>\n<li><a style=\"color: #2d2d2d; text-decoration: underline;\" href=\"https:\/\/aubrikmc.com\/services\/\">Services<\/a><\/li>\n<li><a style=\"color: #2d2d2d; text-decoration: underline;\" href=\"https:\/\/aubrikmc.com\/about-us\/\">About Aubrik<\/a><\/li>\n<li><a style=\"color: #2d2d2d; text-decoration: underline;\" href=\"https:\/\/aubrikmc.com\/blog\/\">Aubrik Blog<\/a><\/li>\n<li><a style=\"color: #2d2d2d; text-decoration: underline;\" href=\"https:\/\/aubrikmc.com\/contact-us\/\">Contact Aubrik<\/a><\/li>\n<li><a style=\"color: #2d2d2d; text-decoration: underline;\" href=\"https:\/\/aubrikmc.com\/\">Aubrik Home<\/a><\/li>\n<\/ul>\n<h2>Sources Checked<\/h2>\n<ul style=\"margin: 16px 0; padding-left: 22px;\">\n<li><a style=\"color: #2d2d2d; text-decoration: underline;\" href=\"https:\/\/aubrikmc.com\/welding-positioners\/welding-turntable\/\">Aubrik BY-series welding turntable page<\/a><\/li>\n<li><a style=\"color: #2d2d2d; text-decoration: underline;\" href=\"https:\/\/www.osha.gov\/etools\/electrical-contractors\/prefabrication\/welding\" rel=\"nofollow noopener\" target=\"_blank\">OSHA prefabrication welding ergonomics<\/a><\/li>\n<li><a style=\"color: #2d2d2d; text-decoration: underline;\" href=\"https:\/\/www.aws.org\/magazines-and-media\/welding-digest\/2026\/may\/safety-first-best-practices-for-handling-heavy-weldments\/\" rel=\"nofollow noopener\" target=\"_blank\">AWS Welding Digest: handling heavy weldments<\/a><\/li>\n<li><a style=\"color: #2d2d2d; text-decoration: underline;\" href=\"https:\/\/www.hse.gov.uk\/foi\/internalops\/ocs\/600-699\/668_26\/index.htm\" rel=\"nofollow noopener\" target=\"_blank\">HSE positioning equipment guidance<\/a><\/li>\n<li><a style=\"color: #2d2d2d; text-decoration: underline;\" href=\"https:\/\/www.iso.org\/standard\/62085.html\" rel=\"nofollow noopener\" target=\"_blank\">ISO 9001:2015 quality management systems<\/a><\/li>\n<li><a style=\"color: #2d2d2d; text-decoration: underline;\" href=\"https:\/\/bancrofteng.com\/wp-content\/uploads\/2017\/12\/WELDING-POSITIONER-MANUAL.pdf\" rel=\"nofollow noopener\" target=\"_blank\">Bancroft welding positioner manual<\/a><\/li>\n<\/ul>\n<blockquote style=\"margin: 24px 0; padding: 16px 18px; border-left: 4px solid #6b7280; background: #f5f5f5;\">\n<p style=\"margin: 0;\">Provided by Aubrik engineering and editorial review. This post uses current Aubrik product page specs, public safety references and buyer-intent research. Proper unit selection and engineering can only be carried out by a direct evaluation of your drawing and fixtures.<\/p>\n<\/blockquote>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p>Choosing the right welding turntable starts with matching rotation to the actual workpiece. One common pitfall is specifying the wrong rotation method for the job. While one small bench turntable might efficiently spin a round TIG flange 24\/7, that same table design can be the wrong piece of equipment for a part that is long, [&hellip;]<\/p>\n","protected":false},"author":7,"featured_media":3982,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_gspb_post_css":"","footnotes":""},"categories":[12],"tags":[],"class_list":["post-3967","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-welding-turntable-blogs"],"blocksy_meta":[],"_links":{"self":[{"href":"https:\/\/aubrikmc.com\/pt\/wp-json\/wp\/v2\/posts\/3967","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/aubrikmc.com\/pt\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/aubrikmc.com\/pt\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/aubrikmc.com\/pt\/wp-json\/wp\/v2\/users\/7"}],"replies":[{"embeddable":true,"href":"https:\/\/aubrikmc.com\/pt\/wp-json\/wp\/v2\/comments?post=3967"}],"version-history":[{"count":0,"href":"https:\/\/aubrikmc.com\/pt\/wp-json\/wp\/v2\/posts\/3967\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/aubrikmc.com\/pt\/wp-json\/wp\/v2\/media\/3982"}],"wp:attachment":[{"href":"https:\/\/aubrikmc.com\/pt\/wp-json\/wp\/v2\/media?parent=3967"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/aubrikmc.com\/pt\/wp-json\/wp\/v2\/categories?post=3967"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/aubrikmc.com\/pt\/wp-json\/wp\/v2\/tags?post=3967"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}